RocketLauncher Updating an Install from v2

How to Update an Install from HyperLaunch 2.x

HyperLaunch 3 is not just an update but rather an upgrade. You will be completely changing everything about HyperLaunch. Follow these steps and you will be on your way getting it installed.

Remove these files & folders from your HyperSpin root directory and back them up in a safe place until after your upgrade is verified working:

Keymapper Profiles\* Modules\ Settings\Global Settings.ini** 7z.dll 7z.exe AutoHotkey.dll HyperSpin.exe HyperLaunch.exe HyperLaunch.log

• This folder does not exist anymore but refer to the keymapper section for the correct placement of your profiles for use with HyperLaunch 3.
  • Only remove this file, not the folder.

Step 1 - HyperSpin.exe

Download the latest version of HyperSpin from HERE and replace your existing HyperSpin.exe. This is required for HyperLaunch 3 to function.

Step 2 - HyperLaunch & HyperLaunchHQ: Download your favorite Front End companion!!

Download HyperLaunch and HyperLaunchHQ folders and contents from GIT, fallow the Download page instructions, also download the HyperLaunch Media from HERE. These can be located anywhere on your computer but it is recommended that they get placed in your HyperSpin Folder to make them simple to find when you need them, plus it will also make it easier to configure some parts of HyperLaunch.

Step 3 - Connect HyperLaunch & HyperSpin: Point HyperSpin to HyperLaunch directory

Open your Settings.ini in your Hyperspin\Settings folder. Add the following line to the bottom of the [Main] Section:

Hyperlaunch_Path=D:\Hyperspin\HyperLaunch\

Make sure your Path matches your HyperLaunch path on your computer, the path above is an example.

While you have the Settings.ini open, you can delete the entire [HyperLaunch] section.

Step 4 - Cleaning up your Hyperspin inis

In each of your %System Name%.ini files in the same folder (eg. MAME.ini), you should delete ALL settings that have to do with HyperLaunch 2. The only settings left in the [exe info] section should be:

[exe info] path= rompath= userompath= exe= romextension= parameters= searchsubfolders= pcgame=false winstate=hidden hyperlaunch=true

They should all be blanked out to avoid confusion like you see above. It is important hyperLaunch key is true and pcgame is false.

The following highlighted lines from are an example of ones that should be deleted, but you may have more:

Now your [EXE] section should like something like this:

Step 5 - Old Modules

If you didn't already, delete your Modules folder located in your Hyperspin root Directory. These modules have been moved to the HyperLaunch folder and have been completely rewritten to accommodate the new features of HyperLaunch so these Modules are no longer required. If you know you set any settings inside your modules, you can keep those for now in case you need to reference those settings to apply to in HyperLaunchHQ later.

Step 6 - System Names with Manufacturer tags

HyperLaunch 3 does not support the loose system name structure. For example, Nintendo shall be named Nintendo Entertainment System. Gamecube shall be called Nintendo GameCube, etc. An easy way to tell if your system is named correctly is if the icon appears next to your system name and your main menu wheel image shows at the bottom in HyperLaunchHQ. You can always check your icon folder to see if the system name is supported.

Another method is to ensure all your Systems in Hyperspin match exactly to the System Names listed in HyperList on the Hyperspin forums http://hyperlist.hyperspin-fe.com/. As an example, the Game Boy should be named “Nintendo Game Boy”, not “Nintendo GameBoy” (note the lack of a space), or “Game Boy”. This will make your configuration and running of HyperLaunch much smoother and the new modules will work across the board.

From now on, whenever you create a new System via Main Menu Wizard in HyperHQ, make sure the new name you enter matches HyperList exactly.

Be sure to check these locations and update them to match the correct system name. Places you need to update are marked as "SYSTEMNAME":

• Hyperspin\Databases\SYSTEMNAME\SYSTEMNAME.xml
• Hyperspin\Databases\Main Menu\Main Menu.xml (open the file an editor and update the system name in there)
• Hyperspin\Media\SYSTEMNAME\
• Hyperspin\Media\Main Menu\Images\Wheel\SYSTEMNAME.png
• Hyperspin\Media\Main Menu\Themes\SYSTEMNAME.zip
• Hyperspin\Media\Main Menu\Video\SYSTEMNAME.mp4
• Hyperspin\Settings\SYSTEMNAME.ini

Step 7 - Emulator Folder Names

This step isn’t mandatory, but again, it will make your setup and maintenance of HyperLaunch much smoother in the long run. It is recommended to keep all your Emulators under the one folder, with sub folders for each revision of an emulator in it’s own folder.

eg. D:\HyperSpin\Emulators\MAME\MAME 0.148\

If you want a really simplified install of HyperLaunch, you can go to the Emulators tab in HyperLaunchHQ and look at the Path entries for each emulator you want to use and make your paths match that of the ini file. If you decide to keep your own folder structure for emulators you can, you can follow the HyperLaunchHQ guide to see how to set up your emulator paths to work with HyperSpin.

You can see in the picture above that the Path contains ..\ at the start of the Path. This indicates that the folder is a "relative path" and in the Hyperspin root directory,

eg. D:\Hyperspin\Emulators\Mednafen\mednafen-0.9.26-wip-win32\medanfen.exe

This method gives HyperLaunch and the emulators great portability. If you decide to move your HyperSpin setup to another drive, you won’t need to reconfigure HyperLaunch to match the paths of the emulators on the new drive you move it to.

Now that you have set up the base for your new HyperLaunch install, you can follow the HyperLaunchHQ guide to learn how to configure HyperLaunch with all the new features!

Step 8 - Install the font for HyperPause

HyperPause uses the default font BebasNeue.ttf. You can find this on dropbox or on your folder after you download all the files in HyperLaunch\Media\Fonts

Right click this file and select Install. You can now see all the text in HyperPause.

Step 9 - Move your <exe> tags in your xmls to Games.ini

HyperLaunch does not use those exe tags, and they need to be transitioned out of your xmls and into HyperLaunch's games.ini files found in your System settings folders. See the Alternate Emu Mapping page on how to create a games.ini for each of your systems and assign games into it.

After this is done for each system, Delete all the <exe> tags in the database. You can do this by using find/replace or by just re-downloading the xml again from HyperList as HyperList does not store these tags.

Step 10 - Additional Utilities

HyperLaunchHQ makes use of various programs such as Xpadder, JoyToKey, VJoy, and more. It is highly recommended to create folders for these in Hyperspin\Utilities\ if you have not already done so.

Recommended: DAEMON Tool Lite, Notepad++, Xpadder, JoyToKey, and VJoy.