Fade

Contents 1 Descrition: 2 Requirements: 3 Limitations 4 Details: 5 Key Table: 6 The Default Animations: 6.1 Transitions: 6.2 Layer 3 Animations: 7 Programmers:

Description:

The Fade feature gives you the ability to fade or animate away from your front end, into a solid color or picture(s) of your choice. Meanwhile, the application will load in the background until the module calls for fade to exit or the application overtakes fade in fullscreen mode.

On exit of your application, Fade will attempt to fade or animate itself into focus, then exit the application and fade or animate back into your front end. The goal is to have a more pleasant transition between the front end and the application.

Requirements:

• Must use a module that has fade support.
• Must be enabled in your settings either globally, or for the system you want it on.
• Must have libraries and any other additional files in your Module Extensions folder.
• .NET Framework 3.5 or Visual C++ 2010 Redistributable Package installed for ZipHandler.dll support (this shows 7z progress during fade)

Limitations:

• True fullscreen applications will lock your video and will overtake Fade. This is by design and nothing you can do about it. It's up to you if you want to enable it for these systems or not. This does not happen in windowed or windowed fullscreen mode if your application supports it.
• Flickering can occur in true fullscreen applications when Fade is unable to overtake the application.

Details:

Create a folder in HyperLaunch\Media\Fade\Systemname\_Default. HyperLaunch will search and load images for each of its Layers if found. Example: HyperLaunch\Media\Fade\MAME\_Default\Layer 1.png

• Layer 1.png (This would show as the background image)
• Layer 2.png (This is a static image, and can be placed anywhere around the screen)
• Layer 3.png (This is a dynamic image of which can have an animation applied to it)
• Layer 4 (#).png (This is a set of images, when played, create an animation. One image = 1 frame. Frame 1 = "Layer 4 (1).png", frame 2 = "Layer 4 (2).png", and so on.)
• Layer -1.png (This would show as the background image during Fade_Out)

Optionally, you can place per-rom layer images in a subfolder named after the rom, and HyperLaunch will use it instead. This allows custom per-game images (like control images) to be shown before loading the game. Example: HyperLaunch\Media\Fade\MAME\88games\Layer 1.png

There is also a global fade image folder that HyperLaunch will look in if nothing is found in the system fade folder. This Fade_Image_Path is defined in the Global HyperLaunch.ini. Place any of the Layer # images in there to load when the above images are not found. Default Location: HyperLaunch\Media\Fade\_Default

Note: Transparency is supported on all images and on all layers. So if you are creative, you can have some very nice looking effects by utilizing the layering properties and settings.

Note 2: Image types supported are png, gif, bmp, and jpg. It is suggested you only use image types that support transparency however.


Key Table:

Key	Default Value	Description
Fade_In	false	Enable Fade support when leaving your front end and starting the emulator
Fade_In_Duration	500	In milliseconds, how long it takes for Fade_In to appear and disappear
Fade_In_Transition_Animation	DefaultAnimateFadeIn	The animation to use when transitioning from your Front End to the emu (This function must exist in "Lib\Fade Animations.ahk")
Fade_In_Delay	0	In milliseconds, the minimum amount of time the Fade_In gui must be up when not using 7z. The module thread will not advance past the FadeInStart() line while this delay is in effect. The Fade screen will remain up after any animations have taken place (if not repeating) or until the total amount of time Fade takes to complete, during this delay. If your animation takes 8 seconds to complete, and you have this setting set to 10000 (10 seconds), it will only delay Fade for 2 seconds.
Fade_In_Exit_Delay	0	In milliseconds, the amount of time to delay the Fade_In screen from closing while the emulator loads in the background This is helpful if you want to wait a certain amount of time after the emulator has loaded before fading out Whatever code is in between the FadeInStart() and FadeInExit() lines in the module will run while before this delay starts.counting down and FadeInExit starts its animation. True fullscreen applications will always interrupt and overtake fade, and this delay will do nothing if this happens
Fade_Out	false	Enable Fade support when exiting the emulator and returning to your front end
Fade_Out_Extra_Screen	false	If true, adds a brief temporary GUI window the same color as what you have set for layer 1 in an attempt to preven flashing of your desktop or front end when an emulator exits from fullscreen. This is not needed when running with bezels enabled or in a windowed emulator as you should never get the above behavior. Not at all guaranteed to work on every PC, just an attempt to prevent the flashing.
Fade_Out_Duration	500	In milliseconds, how long it takes for Fade_Out to appear and disappear
Fade_Out_Transition_Animation	DefaultAnimateFadeOut	The animation to use when transitioning from the emu to your Front End (This function must exist in "Lib\Fade Animations.ahk")
Fade_Out_Delay	0	In milliseconds, the minimum amount of time the Fade_Out gui must be up when not using 7z
Fade_Out_Exit_Delay	0	In milliseconds, the amount of time to delay the Fade_Out screen from closing before returning to your FE. This is useful if for some reason it takes awhile to close your game.
Fade_Layer_Interpolation	7	Controls the amount of interpolation used on Layers 1 & 2 0 = Off 1 = LowQuality 2 = HighQuality 3 = Bilinear 4 = Bicubic 5 = NearestNeighbor 6 = HighQualityBilinear 7 = HighQualityBicubic
Fade_Layer_1_Color	FF000000	Background color when not using an image on layer 1. In ARGB format, first two characters denote the opacity. Here are some examples.
Fade_Layer_1_Align_Image	Align to Top Left	Aligns the Background picture. Choices are: Stretch and Lose Aspect = Image is stretched to fill the screen, disregarding Aspect Ratio Center = Centering image keeping its size and Aspect Ratio Center Width = Image is stretched to Center screen's width, keeping Aspect Ratio Center Height = Image is stretched to Center screen's height, keeping Aspect Ratio Align to Bottom Left = Place the image so the bottom left corner matches the screen's bottom left corner, keeping Aspect Ratio Align to Bottom Right = Place the image so the bottom right corner matches the screen's bottom right corner, keeping Aspect Ratio Align to Top Right = Place the image so the top right corner matches the screen's top right corner Align to Top Left = Place the image so the top left corner matches the screen's top left corner
Fade_Layer_2_Alignment	Bottom Right Corner	Positions layer 2 image on screen. Choices are No Alignment, Center, Top Left Corner, Top Right Corner, Bottom Left Corner, Bottom Right Corner, Top Center, Bottom Center, Left Center, Right Center
Fade_Layer_2_X	300	X location to position layer 2 image if Fade_Layer_2_Alignment is not set
Fade_Layer_2_Y	300	Y location to position layer 2 image if Fade_Layer_2_Alignment is not set
Fade_Layer_2_Adjust	1	Adjust size of layer 2 image (1=full size)